화학공학소재연구정보센터

Polymer(Korea)

Polymer(Korea), Vol.39, No.5, September, 2015 Entire volume, number list
ISSN: 0379-153X (Print) 

In this Issue (20 articles)

697 - 704 PVDF 분리막 제조를 위한 상분리 거동 연구
Investigation of Phase Separation Behavior for PVDF Membrane Formation

임동준, 김성수
Im DJ, Kim SS
705 - 713 다른 유기화 점토를 사용한 에폭시 나노 복합체의 특성 비교
Comparisons of the Properties of Epoxy Nanocomposites with Different Organoclays

하태영, 장진해
Ha TY, Chang JH
714 - 720 경화제의 화학적 구조에 따른 UV 경화형 2-EHA/n-BA 점착제의 접착특성
Effect of Chemical Structure of Crosslinking Agent on Adhesion Properties of UV Cured 2-EHA/n-BA PSA

김호겸
Kim HG
721 - 726 기상 중합으로 제조된 PEDOT 박막의 산 처리에 의한 2차 도핑
Secondary Doping of Vapor Phase Polymerization Based on Conductive PEDOT Thin Film by Sulfuric Acid Treatment

이상우, 임진형
Lee SW, Yim JH
727 - 732 시스타민 코어 폴리아미도아민 덴드리머에 펩티드와 감마 아미노부티르산의 도입을 통한 새로운 유전자 전달체 연구
Conjugation of Peptide to Cystamine Core Polyamidoamine with γ-Aminobutyric Acid for Gene Delivery

박혜원, 유광식, 송수정, 최준식
Park HW, Yu GS, Song SJ, Choi JS
733 - 738 폴리실라잔 가교제를 이용한 LED 에폭시 봉지재의 경화와 열 안정성 연구
Curing and Heat Stability of Epoxy Encapsulants with Polysilazane Cross-linking Agent

박용해, 김진권
Piao L, Kim JK
739 - 745 다양한 친수성 고분자를 이용한 삼중층 정제의 니페디핀 서방화 및 특성분석
Sustained Release Formulation and Characterization of Nifedipine Three-layered Tablet Using Various Polymers

이천중, 하현정, 김수영, 박진영, 장나금, 송정은, 강길선
Lee CJ, Ha HJ, Kim SY, Park JY, Jang NK, Song JE, Khang G
746 - 753 무색투명 폴리에테르이미드의 합성 및 PET 블렌드
Synthesis of Colorless and Transparent Poly(ether imide)s and Their PET Blends

양우재, 장진해
Yang WJ, Chang JH
754 - 760 에틸렌-프로필렌-디엔-모노머/불소고무 블렌드의 상 모폴로지와 기계적 물성
Phase Morphology and Mechanical Properties of Ethylene-Propylene-Diene-Monomer/Fluoroelastomer Blends

이기쁨, 김승겸, 유용환, 강석인, 오종갑, 허양일, 정병헌, 나창운
Lee GB, Kim SG, Yoo YH, Kang SI, Oh JG, Huh YI, Jeong BH, Nah C
761 - 768 Layer-by-Layer 나노코팅법을 이용한 수분회수용 폴리에테르술폰 중공사막의 표면개질
Surface Modification of Polyethersulfone Hollow Fiber Membrane for Water Recovery Using Layer-by-Layer Nanocoating Method

박소정, 윤상희, 최원길, 조성근, 이형근, 허강무
Park SJ, Yun SH, Choi WK, Cho SK, Lee HK, Huh KM
769 - 774 초음파 분무를 이용한 PEO-PPO-PEO 삼중블록공중합체 미립자의 형성
Formation of PEO-PPO-PEO Triblock Copolymer Microdroplets by Ultrasonic Atomization

이재근, 김형수
Lee J, Kim H
775 - 781 열 및 구조해석을 통한 사출성형기용 바이메탈 실린더의 구조적 안정성 연구
Structural Stability Study Using Thermal and Structural Analysis of a Bimetal Cylinder in an Injection Molding Machine

박성열, 이강혁, 남윤효, 류민영
Park SY, Rhee GH, Nam YH, Lyu MY
782 - 787 헤스페리딘을 함유한 락타이드 글리콜라이드 공중합체 지지체에서 섬유륜 세포의 증식과 거동 평가
Proliferation and Growth Behavior of Annulus Fibrosus Cells on Hesperidin Loaded Poly(lactide-co-glycolic acid) Scaffold

장나금, 고현아, 차세롬, 이선의, 정현기, 김수영, 신재훈, 김은영, 송정은, 강길선
Jang NK, Ko HA, Cha SR, Lee SE, Jeong HK, Kim SY, Shin JH, Kim EY, Song JE, Khang G
788 - 794 산화그래핀이 포함된 폴리(N-이소프로필아크릴아미드) 하이드로젤의 기계적, 열적 특성 연구
Investigation of Mechanical and Thermal Properties of Poly(N-isopropylacrylamide) Hydrogels Containing Graphene Oxide

김도완, 왕상훈, 이헌상, 윤진환
Kim D, Wang S, Lee HS, Yoon J
795 - 800 난연제를 함유한 에틸렌-프로필렌-디엔-터모노머 고무컴파운드의 수명예측
Lifetime Prediction of Flame Retardant-Filled Ethylene-Propylene-Diene-Termonomer Rubber Compounds

오재호, 고피사티 쉬부랄, 비스마르크 맨사, 안대업, 김성진, 정광운, 나창운
Oh J, Shibulal GS, Mensah B, Ahn DU, Kim SJ, Jeong KU, Nah C
801 - 808 재수화된 유청분말내 Bacillus subtilis ATCC 663에 의해 다른 탄소원들로부터 생산된 폴리글루타믹산의 특징
Properties of Polyglutamic Acid Produced by Bacillus subtilis ATCC 6633 in Rehydrated Whey Powder Supplemented with Different Carbon Sources

Cagri-Mehmetoglu A, van de Venter M
Cagri-Mehmetoglu A, van de Venter M
809 - 813 폴리염화비닐/PB-g-PMMA 복합재의 특징
Properties of Poly(vinyl chloride)/PB-g-PMMA Composites

Wu G, Zhang H, Zhang H
Wu G, Zhang H, Zhang H
814 - 819 순차적 마이크로 몰딩 방법을 이용한 이방성 패치 입자 제조 기술
Fabrication of Microparticles with Anisotropic Patchy Based on Sequential Micromolding Technique

이병진, 최창형, 김종민, 강성민, 남진오, 진시형, 이창수
Lee B, Choi CH, Kim J, Kang SM, Nam JO, Jin SH, Lee CS
820 - 826 셀룰로오스 보습제가 시멘트 몰탈의 기계적 특성에 미치는 영향
Effect of Cellulose Based Water Retention Additives on Mechanical Properties of Cement Based Mortar

김유석, 강호종
Kim YS, Kang HJ
827 - 829 사출성형 시편 표면의 잔류응력과 케미컬 크랙과의 관계
Relationship between Residual Stress in the Surface of an Injection Molded Specimen and Chemical Crack

우정우, 류민영
Woo JW, Lyu MY